學術著作

 

A. Journal Papers

1.Hocheng, H., Tsai, H. Y., Shiue, J. J. and Wang, B., “Feasibility Study of Abrasive-Waterjet Milling of Fiber-Reinforced Plastics,” Journal of Manufacturing Science and Engineering – Transaction of the ASME, Vol. 119, No. 2, pp. 133-142,1997 (SCI IF: 3.952)

2.Hocheng, H., Tsai, H. Y. and Tsai, M. S., “Effects of Kinematic Variables on No uniformity in Chemical Mechanical Planarization,” International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1651-1669, 2000 (SCI IF:10.331)

3.Hocheng, H., Tsai, H. Y., and Huang, Y. L., “Essential Aspects of Chemical Mechanical Planarization for Oxide Semiconductor,” Precision Machining of Advanced Materials, Vol. 196, pp. 1-24, 2001 (EI)

4.Hocheng, H., Tsai, H. Y., and Su, Y. T., “Modeling and Experimental Analysis of the Material Removal Rate in the Chemical Mechanical Planarization of Dielectric Films and Bare Silicon Wafers,” Journal of the Electrochemical Society , Vol. 148, pp. G581-G586, 2001 (SCI IF: 4.386)

5.Cheng, C. Y., Tsai, H. Y., Wu, C. H., Liu, P. Y., Hsieh, C. H., and Chang, Y. Y., “An oxidation enhanced mechanical polishing technique for CVD diamond films,” Diamond and Related Materials, Vol. 14, pp. 622-625, 2005 (SCI IF: 3.806)

6.Chen, C. Y., Tsai, H. Y., and Lin, H. Y., “Optical Disk Groove Mastering Using an Electron Beam Recorder and Chemically Amplified Resist,” IEEE Transactions On Magnetics, Vol. 41, No. 2, pp. 1025-1027, 2005 (SCI IF: 1.848)

7.May, P. W., Tsai, H. Y., Wang, W. N., and Smith, J. A., “Deposition of CVD diamond onto GaN,” Diamond and Related Materials, Vol. 15, pp. 526-530, 2006 (SCI IF:3.806)

8.Wu, C. C., Horng, R. H., Wu, D. S., Chen, T. N., Ho, S. S., Ting, C. J., and Tsai, H. Y., “Thinning Technology for Lithium Niobate Wafer by Surface Activated Bonding and Chemical Mechanical Polishing,” Japanese Journal of Applied Physics, Vol. 45, No. 4B, part 1, pp. 3822-3827, 2006 (SCI IF: 1.491)

9.Tsai, H. Y., “Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” Journal of Materials Processing Technology, Vol. 192-193, pp. 55-59, 2007 (SCI IF:6.162)

10.Ting, C. J., Tsai, H. Y., Chou, C. P., Lin, H. Y., Wu, T. C., “Optical Characteristics of Silver Film on the Moth-Eye Structure,” Journal of Mechanical Science and Technology, Vol. 21, pp. 1752-1755, 2007 (SCI IF: 1.810)

11.Wu, C. W., Tsai, J. R. Tsai, H. Y., and Hsiao, C. C., “Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique,” Journal of Mechanical Science and Technology, Vol. 21, No. 10, pp. 1498-1504, 2007 (SCI IF: 1.810)

12.Tsai, H. Y., Ting, C. J., Kuo, K. L., Chou, C. P., “Feasibility Study on UV YAG Laser Patterning on Diamond Film,” Key Engineering Materials, Vol. 364-366, pp. 613-617, 2007 (EI) (NSC 95-2622-E-019-004-CC3)

13.Ting, C. J., Tsai, H. Y.*, and Chou, C. P., “Fabrication of Large-Area Imprint Mold with High-Aspect-Ratio Nano tip Arrays of Sub-Micron Diameter,” Key Engineering Materials, Vol. 364-366, pp. 607-612, 2007 (EI) (NSC 95-2221-E-019-096)

14.Tsai, H. Y., Ting, C. J., Kuo, K. L., and Chou, C. P., “Finite Difference Time Domain Analysis of Sub-Wavelength Conical Structured Array for Antireflective Application,” Tamkang Journal of Science and Engineering, Vol. 10, No. 2, pp. 127-131, 2007 (EI)

15.Tsai, H. Y., Kuo, K. L., “Nitrogen effect on the diamond deposition processing by 915-MHz microwave plasma enhanced chemical vapor deposition reactor,” Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 2, pp. 157-162, 2007 (SCI IF:0.228)

16.Tsai, H. Y., Ting, C. J., and Chou, C. P., “Evaluation research of polishing methods for large area CVD diamond film produced by chemical vapor deposition,” Diamond and Related Materials, Vol. 16, pp. 253-261, 2007 (SCI IF:3.806)

17.Tsai, H. Y., “Finite Difference Time Domain Analysis of Three-Dimensional Sub-Wavelength Structured Arrays,” Japanese Journal of Applied Physics, Vol. 47, No. 6B, pp. 5007-5009, 2008 (SCI IF: 1.491)

18.Tsai, H. Y., Kuo, K. L., and Wu, C. W., “Study of aluminum film deposition on the surface of micro-trench by dual ion beam sputtering,” Japanese Journal of Applied Physics, Vol. 47, No. 6B, pp. 5036-5038, 2008 (SCI IF: 1.491)

19.Pan, C. T., Wu, T. T., Tsai, H. Y., Chou, M. C., and Wu, T. C., “Fabrication of a micro-punching head using LIGA and stacking processes,” Journal of Micromechanics and Micro engineering, Vol. 18, No. 9, 2008 (SCI IF: 2.282)

20. Ting, C. J, Huang, M. C., Tsai, H. Y., Chou, C. P, and Fu, C. C., “Low Cost Fabrication of the Large-Area Anti-Reflection Films from Polymer by Nanoimprint/Hot-embossing Technology,” Nanotechnology, Vol. 19, No. 20, 2008 (SCI IF: 3.953)

21.Tsai, H. Y., and Ting, C. J., “Optical characteristics of moth-eye structures on poly (methyl methacrylate) and polycarbonate sheets fabricated by thermal nanoimprinting processes,” Japanese Journal of Applied Physics, Vol. 48, 06FH19, 2009 (SCI IF: 1.491)

22.Tsai, H. Y., Luo, S. W., Wu, C. W., and Wang, S. H., “Submicron-Structure Machining on Silicon by Femtosecond Laser,” Transactions of Nonferrous Metals Society of China, Vol. 19, pp. S171-S177, 2009 (SCI IF: 3.752)

23. Tsai, H. Y., Lee, C. Y., Wu, C. C. and Shih, E. P., “Microbial fuel cell performance of multiwall carbon nanotubes on carbon cloth as electrodes,” Journal of Power Sources, Vol. 194, pp. 199-205, 2009 (SCI IF:9.794)

24. Wang, S. H., Huang, C. S., Lee, W. S., Chen, T. H., Wu, C. C., Lien, C., and Tsai, H. Y., “Impact deformation behavior of duplex and super austenitic stainless steels welds by split Hopkinson pressure bar,” Metals and Materials International, Vol. 15, No. 6, pp. 1007-1015, Dec. 2009 (SCI IF: 3.451)

25.Tsai, H. Y., Ting, C. J., “Low Cost Fabrication of Sub-Wavelength Structures on Large-Area Polymer Sheet by UV Curing and Nano-Imprinting Processes,” Surface Review and Letters, Vol. 17, No. 3, pp. 1-7, 2010 (SCI IF:1.240)

26.Tsai, H. Y., Chang, C. C. and Wu, C. W., “Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition,” Key Engineering Materials, Vol. 443, pp. 510-515, 2010 (EI)

27.Wu, C. W., Chi, C. H., Tsai, H. Y. and Shen, Y. K., “Fabrication of a Large-Area Silicon Mold with Microstructures Using a Novel Recombining Technique,” Key Engineering Materials, Vol. 443, pp. 213-218, 2010 (EI)

28.Wu, H. C., Tsai, H. Y., Chiu, H. T., and Lee, C. Y., “Silicon Rice-Straw Array Emitters and Their Superior Electron Field Emission,” ACS Applied Materials & Interfaces, Vol. 2, No. 11, pp. 3285-3288, 2010 (SCI IF: 10.383)

29.Tsai, H. Y., Yu, Y. K., and Chen, R., “Characteristic Analysis of Multi-layer Piezoelectric Substrate for SAW Filters by Effective Surface Permittivity Method,” IEEE Xplore 2010 (EI)

30.Tsai, H. Y., and Kuo, C. M., “The study of fixing field curvature by flexible image sensor array,” IEEE Xplore 2010 (EI)

31.Tsai, H. Y., Liu, H. C., Chen, J. H., and Yeh, C. C., “Low cost fabrication of diamond Nano-tips on porous anodic alumina by hot filament chemical vapor deposition and the field emission effects,” Nanotechnology, Vol. 22, 235301, 2011 (SCI IF: 3.953)

32.Tsai, H. Y. and Liu, Y. M., “Diamond Film Deposited Directly on Sapphire Substrate by Hot Filament Chemical Vapor Deposition,” Journal of the Chinese Society of Mechanical Engineers, Vol. 32, No. 1, pp. 45-51, 2011 (SCI IF:0.228)

33.Yeh, M. K., Hsieh, H. C., Chang, S. H., Chen, R., and Tsai, H. Y., “Problem-Based Learning Achievement of K-12 Students Participating in a Nanotechnology Hands-on Works Exhibition in Taiwan,” International Journal for Cross-Disciplinary Subjects in Education, Vol. 2, No. 3, pp. 488-494, 2011 

34.Tsai, H. Y., Lu, M. T., and Luo, S. W., “Simulation Study on Anti-Reflective Effects for Different Submicron-structures,” Advanced Materials Research, Vols. 314-316, pp. 123-126, 2011(EI)

35. Tsai, H. Y., Lin, Y. P., and Chen, C. C., “Tracking and Detecting Moving Objects Using Stereo Camera on Moving Platform,” Advanced Science Letters, Vol. 14, pp. 1-9, 2012

36. Tsai, H. Y., and Liu, C. W., “Innovative Fabrication of Micro and Nano Hybrid Structure and Application in Optical Films,” Advanced Science Letters, Vol. 14, pp. 444-449, 2012

37.Luo, S. W., Chang, T. L., and Tsai, H. Y., “Fabrication of Glass Micro-prisms using Ultra-Fast Laser Pulses with Chemical Etching Process,” Optics and Lasers in Engineering, Vol.  50, pp. 220-225, 2012 (SCI IF: 5.666)

38.Tsai, H. Y. and Yeh, C. C., “Suppressed screening effects in curvilinear tetrahedral diamond field emitter arrays fabricated on anodic aluminum oxide,” Journal of the Electrochemical Society, Vol. 159, No. 1, pp. K1-K4, 2012 (SCI IF:4.386)

39.Tsai, H. Y. and Huang, Y. W., “Image Tracking Study on Courtship Behavior of Drosophila,” PLoS ONE, Vol. 7, No. 4, e34784, 2012 (SCI IF:3.752)

40.Tsai, H. Y. and Ting, C. J., “Optical Characteristics of Gold Film on the Moth-Eye Structure,” Current Applied Physics, Vol. 12, pp. S156-S159, 2012 (SCI IF: 2.856)

41.Tsai, H. Y., Wu, C. W., Lin, Y. M. and Chang, H. C., “Study on Diamond Thin Film Deposition on Graphite Substrate by Different Pretreatment Methods,” Journal of Ceramic Processing Research, Vol. 13, pp. S82-S88, 2012 (SCI IF: 0.636)

42.Luo, S. W., Chang, T. L., Tsai, H. Y., “Fabrication of Diffractive Micro Lens Array by Femtosecond Laser-assisted Etching Process,” Microelectronic Engineering, Vol. 98, pp.  448–452, 2012 (SCI IF: 2.662)

43.Luo, S.-W. and Tsai, H.-Y., “Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process,” Journal of Materials Processing Technology, Vol. 213, pp. 2262-2269, 2013 (SCI IF:6.162)

44.Shih-Chang Liu, Yung-I Chen, Hung-Yin Tsai, Kuo-Cheng Lin, Yung-Hsing Chen, “Thermal stability of Ir–Re coatings annealed in oxygen containing atmospheres,” Surface & Coatings Technology, Vol. 237, pp. 105–111, 2013 (SCI IF: 4.865)

45.Shih-Chang Liu, Yung-I Chen, Jiin-Jyh Shyu, Hung-Yin Tsai, Kun-Yi Lin, YungHsing Chen, Kuo-Cheng Lin, “The chemical inertness of Ir–Re and Ta–Ru coatings in molding B2O3–ZnO–La2O3-based glass,” Surface & Coatings Technology, Vol. 259, pp. 352–357, 2014 (SCI IF: 4.8656)

46.Chen-Kuan Kuo, Shao-Wei Luo, Hung-Yin Tsai, Shing-Hoa Wang, Rudder T. Wu, Min-Chieh Chou, Tsong-Ru Tsai, Ming-Chan Shieh, Ya-Ching Yang and Kent Huang, “Nano-quasi-grating of optical diffraction on special stainless steel by a femtosecond-pulsed laser,” Materials Letters, Vol. 138, pp. 29-32, 2015 (SCI IF: 3.574)

47.H.Y. Tsai, W.H. Hsu, Y.K. Yu and R. Chen, “Using the effective surface permittivity method to analyze multilayer piezoelectric substrates for surface acoustic wave filters,” Journal of Mechanics, Vol. 31, pp. 139-145, 2015 (SCI IF: 1.455)

48.Hung-Yin Tsai and Ping-Huan Tsai, “Fabrication and Field Emission Characteristic of Microcrystalline Diamond/Carbon Nanotube Double-layered Pyramid Arrays,” Thin Solid Films, Vol. 584, pp. 330-335, 2015 (SCI IF: 2.358)

49.Hung-Yin Tsai, Wei-Hsuan Hsu and Ying-Chen Huang, “Characterization of Carbon Nanotube/Graphene on Carbon Cloth as an Electrode for Air-cathode Microbial Fuel Cells,” Journal of Nanomaterials, Vol. 2015, 686891, 7 pages, 2015 (SCI IF: 3.791)

50.Hung-Yin Tsai and Chi-Wei Kuo, “Thermal stress and failure location analysis for through silicon via in 3D integration,” Journal of Mechanics, Vol. 32, Issue 1, pp. 47-53, 2015 (SCI IF: 1.455)

51.Hung-Yin Tsai, Shao-Wei Luo, and Tien-Li Chang, “Surface forming on glass material by femtosecond laser modification with HF etching process,” CIRP Annals Manufacturing Technology, Vol. 1, 2015 (SCI IF: 4.482)

52.Hung-Yin Tsai and Po-Tang Tseng, “Field emission characteristics of diamond nano-tip array fabricated by anodic aluminum oxide template with nano-conical holes,” Applied Surface Science, Vol. 351, pp. 1004-1010, 2015 (SCI IF: 7.392)

53.H. Y. Tsai, K. H. Yu, and M. K. Yeh, “Growth of nanocrystalline diamond films on quartz by hot-filament chemical vapor deposition,” Journal of Ceramic Processing Research, Vol. 16, No. 5, pp. 584~590, 2015 (SCI IF: 0.636)

54.Hisashi Imai, Kuan-Yu Chen, Katsuyoshi Kondoh, Hung-Yin Tsai, and Junko Umeda, “Effect of Chromium Behavior on Mechanical and Electrical Properties of P/M Copper-Chromium Alloy Dispersed with VGCF,” International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering Vol. 9, No. 7, pp. 755-758, 2015

55.I-Lin Chang, Ping-Huan Tsai, Hung-Yin Tsai, “Field emission characteristics of CNFB-CNT hybrid material grown by one-step MPCVD,” Diamond and Related Materials, DIAMAT-06641; Vol. 69, 8 pages, pp. 229-236, 2016 (SCI IF:3.806)

56. Po-Tang Tseng, Ping-Huan Tsai, Anvert Lu, Jiang-Liang Hou, and Hung-Yin Tsai, “Field Emission Characteristic Study on Bristling Few-layer Graphite/Diamond Composite Film,” Diamond and Related Materials, Vol. 73, pp. 121~131, 2017 (SCI IF:3.806)

57.Wei-Hsuan Hsu, Hung Yin Tsai and Ying-Chen Huang, "Characteristics of Carbon Nanotubes/Graphene Coatings on Stainless Steel Meshes Used as Electrodes for Air-cathode Microbial Fuel Cells," Journal of Nanomaterials, vol. 2017, 9875301, 9 pages (SCI IF: 2.207)

58.Hung-Yin Tsai, Chun-Wei Huang and Yi-Hung Chen, "Periodic Structures on STAVAX Rapidly Fabricated by Femtosecond Laser Induced Periodic Surface Structures (FLIPSS)," Procedia CIRP, vol. 63, pp. 455-458, 2017

59.Vaclav Novotny, Jakub Mascuch, Hung-Yin Tsai, Michal Kolovratnik, "Design of experimental rig for validation of absorption power cycle concept," Energy Procedia, vol. 105, pp. 4990-4996, 2017

60.W. H. Hsu , M. C. Chou and H. Y. Tsai, " Design and Fabrication of Anisotropic Conductive Film for Application of Probe Card," Journal of Mechanics , vol. 33, No. 5, pp. 655-661, 2017(SCI IF:1.455)

61.Chih-Fan Hsu, Hung-Yin Tsai, Te-Hung Chen, " The effect of Manufacturing Parameters and Environmental Factors on Mechanical Properties of Carbon Fiber/Epoxy Composites," Journal of Mechanics, , vol. 34, No. 6, pp. 839-846, 2018 (SCI IF: 1.455)

62.Ping-Huan Tsai, and Hung-Yin Tsai, “Carbon Nano-Flake Ball with a Sandwich-Structure Composite of Diamond Core Covered by Graphite Using Single-Step Microwave Plasma Chemical Vapor Deposition,” Carbon, vol. 136, pp. 1-10, 2018 (SCI IF: 11.307)

63.Tsung-yu Chou, Heng Li, Yu-Cheng Li, Hung-Yin Tsai and Ming-Cheng Yip, “Fabrication and Characteristics Study on Graphene-Reinforced Silver Nanowire/ Polybenzoxazine/ Epoxy Copolymer Composite Thin Films,” Polymer International, vol. 67, No. 5, pp. 1081-1093, 2018(SCI IF:3.213)

64.Hung-Yin Tsai, Wei-Hsuan Hsu*, Yi-Jhu Liao, " Effect of Electrode Coating with Graphene Suspension on Power Generation of Microbial Fuel Cells," Coatings, vol. 8, No. 7, pp. 243, 2018(SCI IF:3.236)

65.Po-kai Chiu, Yi-Ting Liao, Hung-Yin Tsai, and Donyau Chiang, " Effect of electron-beam deposition process variables on the film characteristics of the CrOx films," AIP Advances, vol. 8, 025016, 2018(SCI IF:1.697)

66.Albert J. Shih, Berend Denkena, Thilo Grove b, David Curry, Hong Hocheng, Hung-Yin Tsai, Hitoshi Ohmori , Kazutoshi Katahira, Z.J. Pei, "Fixed abrasive machining of non-metallic materials," CIRP Annals Manufacturing Technology, vol. 67, pp. 767-790, 2018(SCI IF:4.482)

67.Hung-Yin Tsai, Maung Sein Lin, Anvert Lu, and Jiang-Liang Hou, "Study on Field Emission Characteristics of Nano-Diamond Tips Grown on Anodic Aluminum Oxide Templates with Different Aspect Ratios," Nanoscience and Nanotechnology Letters, vol. 10, pp. 709-716, 2018(SCI IF:1.128)

68.Hung-Yin Tsai, Wei-Yuan Hsu, Yi-Hung Chen and Che-ChihTsao, " Image Monitoring Study on Fused Deposition Modeling (FDM) Fabrication Process ," Journal of the Chinese Society of Mechanical Engineers, Vol.39, No.6, pp 537~544 , 2018(SCI IF: 0.228

69.Tsung Yu Chou, Hung-Yin Tsai, Ming Chuen Yip, " Preparation of CFRP with modified MWCNT to improve the mechanical properties and torsional fatigue of epoxy/polybenzoxazine copolymer ," Composites Part A, vol. 118, pp. 30-40, 2019 (SCI IF: 9.463)

70.Shih-Chun Tseng, Tung-Che Lee, Hung-Yin Tsai, " Diffusion effect for the catalytic growth of carbon nanotubes on metal alloys substrate ," Diamond and Related Materials, vol. 96, pp. 112-117, 2019 (SCI IF:3.806)

71.S.R.Wu, T.H.Chen, H.Y.Tsai, " A review of actuation force in origami applications ," Journal of Mechanics, vol. 35, pp. 627-639, 2019 (SCI IF: 1.455)

72.Vitaly Gurylev, Tzu-Kang Chin, Hung-Yin Tsai, "Carbon Nanotubes Decorated with Platinum Nanoparticles for Field-Emission Application," ACS Omega, vol. 4, pp. 15428-15434, 2019 (SCI IF: 4.132)

73.Wei-Hsuan Hsu, Yin-Husan Chien, Hung-Yin Tsai, " Experimental and Modeling Analysis of the Cell-Wall Fracture of Nannochloropsis Oculata ," Journal of Mechanics, vol. 36, pp. 789-797, 2020 (SCI IF:1.455)

74.Tsung Yu Chou, Jianlei Wang, Hung-Yin Tsai, Yi-Lun Sun, Jia-Tao Miao, Ming-Chuen Yip, Chih-Tsung Chang, Lixin Wua, "A novel thin-film image binarization method to detect nanofiller dispersibility for improving the mechanical performance of epoxy/polybenzoxazine laminate nanocomposites," Composites Science and Technology, vol. 208, 108778 , 2021 (SCI IF: 9.879)

75.Jaroslav Hricko, Rene Hartansky, Robert Andok, Pavol Nemec, and Hung-Yin Tsai, "Force/Displacement MEMS Based on Electromagnetic Field Principle for Tiny Insects Monitoring," Journal of Physics: Conference Series Vol.1837, 012010, 2021

76.HY Tsai, E Ceretti, D Rizzi, P Ginestra, TH Kao, MC Leu, "Laser induced metallization on flexible polymer coating: Analysis and application," Journal of Materials Processing Technology, vol. 290, 116986, 2021 (SCI IF: 6.162)

77.Vaclav Novotny, David J. Szucs , Jan Špale, Hung‐Yin Tsai and Michal Kolovratnik, " Absorption Power and Cooling Combined Cycle with an Aqueous Salt Solution as a Working Fluid and a Technically Feasible Configuration," Energies , 14, 3715, 2021 (SCI IF:3.252)

78.Chih-Kai Cheng, and Hung-Yin Tsai, " Enhanced detection of diverse defects by developing lighting strategies using multiple light sources based on reinforcement learning," Journal of Intelligent Manufacturing, 2021(SCI IF: 7.136 )

79.Vaclav Novotny, Jan Spale, David J. Szucs, Hung-Yin Tsai, Michal Kolovratnik , “Direct integration of an organic Rankine cycle into an internal combustion engine cooling system for comprehensive and simplified waste heat recovery ,” Energy Reports , 2021(SCI IF: 4.937 )

80.Yue-Zhen Huang, Shih-Chun Tseng, Yi-Hung Chen, Hung-Yin Tsai , “The Mechanisms of Carbon Nano-Flake Balls Growth by Laser Ablation and Microwave Plasma Chemical Vapor Deposition,” Surface and Coatings Technology, Vol. 425, 2021 , 127668(SCI IF: 4.865)

81.Wei-Hsuan Hsu, Chia-Wei Lin, Yi-Hung Chen, Shang-Ru Wu, Hung-Yin Tsai, “Study on carbon nanotube/shape memory polymer composites and their applications in wireless worm actuator,” Journal of Mechanics, Volume 37, Pages 636–650, 2021(SCI IF: 1.455 )

82.Ching-Hsin Chen, Ann-Shyn Chiang and Hung-Yin Tsai, “Three-Dimensional Tracking of Multiple Small Insects by a Single Camera,” Journal of Insect Science, Vol. 21, Issue 6, pp1~12 , 2021(SCI IF: 2.066 )

83.Ji Huang, Chunliang Kuo and Hung-Yin Tsai, “Stiffness Enhancement, Anti-Aging, and Self-Forming Holes in Polycarbonate/Acrylonitrile- Styrene-Acrylic by the Core-Shell Structure of Acrylic Resin,” Polymers, Vol. 14, Issue 4, 782 , 2022 (SCI IF: 4.967 )

84.Jaromír Klarák, Robert Andok, Jaroslav Hricko, Ivana Klaˇcková and Hung-Yin Tsai, “Design of the Automated Calibration Process for an Experimental Laser Inspection Stand,” Sensors, Vol. 22, Issue 14, 5306, 2022

85.Tzu-Yu Huang, Po-Yu Huang, Hung-Yin Tsai, “Automatic design system of optimal sunlight-guiding micro prism based on genetic algorithm,” Developments in the Built Environment, Volume 12, 100105, 2022

86.Shih Chun Tseng, Chin-An Wang, Hsu Shen Chu, Hung-Yin Tsai, “Thermoelectric properties of a vertically-aligned carbon nanotube array with embedded bismuth telluride,” Journal of Materials Science, vol. 57, issue 41, pp. 19396-19404, 2022

87.Ji Huang, Chunliang Kuo and Hung-Yin Tsai, “Increased UV resistance and mechanical properties of regenerated polycarbonate/acrylonitrile-styrene-acrylic via addition of modified CNT and 2-(2′-hydroxy-5′-methylphenyl)benzotriazole,” polymer degradation and stability, Vol. 208, 110262, 2023

88.Jaromír Klarák, Ivana Klačková , Robert Andok , Jaroslav Hricko , Vladimír Bulej and Hung-Yin Tsai , “Autoencoders Based on 2D Convolution Implemented for Reconstruction Point Clouds from Line Laser Sensors,” Journal of Materials Science, Sensors, Vol. 23, Issue 10, 4772, 2023

89. Hao‑Hsuan Huang, Chih‑Kai Cheng, Yi‑Hung Chen, Hung‑Yin Tsai, " The Robotic Arm Velocity Planning Based on Reinforcement Learning," International Journal of Precision Engineering and Manufacturing, vol. 24, pp. 1707-17214, 2023

90.Richard Adiputra, Yi-Hung Chen, Shang-Ru Wu , Gabriel Vanko , Robert Andok and Hung-Yin Tsai, " Study on fabrication of force transducer based on carbon nano-flake balls," Nanotechnology, vol. 35, No. 3, 2023

91.Shih Chun Tseng , Chao-Te Lee, Wei-Chun Chen , Hung-Yin Tsai, " Effect of onion-like carbon on the resistance and adhesion of pogo pins with titanium adhesive layer of varying thicknesses," Surface & Coatings Technology, vol. 479, 130585, 2024

92.Ji Huang, Chunliang Kuo and Hung-Yin Tsai, "Anti-corrosive and UV-resistant three-dimensional epoxy coating based on reduced graphene oxide, modified carbon nanotubes, modified fullerene, and 2-(2′-hydroxy-5′-methylphenyl) benzotriazole for polycarbonate/acrylonitrile-styrene-acrylic," Polymer Degradation and Stability, vol. 220, 110629, 2024

93.Jaromír Klarák, Robert Andok, Peter Malík, Ivan Kuric, Mário Ritomský, Ivana Klačková, Hung-Yin Tsai, " From Anomaly Detection to Defect Classification," Sensors, vol. 24, issue 2, pp. 429-442, 2024

94.Ching-Hsin Chen, Yu-Chiao Lin, Sheng-Hao Wang, Tsung-Han Kuo, Hung Yin Tsai, " An automatic system for recognizing fly courtship patterns via an image processing method," Methodology, vol. 20, article number 5, 2024

 

B. Issued Patents
(共有61件，其中美國發明16件、日本發明2件、新型1件、中華民國發明30件及新型4件、大陸發明8件。另外，尚有32件專利申請中。)

 

C. International Conference Papers

1.Hocheng, H., Tsai, H. Y., Shiue, J. J. and Wang, B., “Feasibility Study of Abrasive-Waterjet Milling of Fiber-Reinforced Plastics,” Proceedings of the 1995 Joint ASME Applied Mechanics and Materials Summer Meeting, ASME, pp. 93-114, 1995 (USA) (EI)

2.Hocheng, H., Tsai, H. Y. and Chen, L.-J., “A Kinematic Analysis of CMP Based on Velocity Model,” Proceedings of 2nd International CMP-MIC, pp. 277-280, Feb. 1997 (USA)

3.Hocheng, H., Tsai, H. Y., “The Analytical Aspect of the Preston Equation in Chemical Mechanical Planarization,” Proceedings ASME International Mechanical Engineering Congress and Exposition, MED-Vol. 8, pp. 33-36, 1998 (USA) (EI)

4.Hocheng, H., Tsai, H. Y., “A Bearing Model of Relative Motion between Wafer and Abrasives in Chemical Mechanical Planarization,” Proceedings of 1998 International Conference on Mechatronic Technology, pp. 489-492, 1998 (Taiwan)

5.Hocheng, H., Tsai, H. Y., Lai, K. C., Lin, H. Y. and Wu, T. C., “Kinematic Analysis of the Planetary Train in Chemical Mechanical Planarization,” Proceedings of euspen 1st Conference for Precision Engineering and Nanotechnology, pp. 384-387, 1999 (Germany)

6.Tsai, H. Y., Yang, H., Pan, C. T., Chou, M. C., “Laser Patterning Indium Tin Oxide (ITO) Coated on PET Substrate,” Proceedings of International Symposium on Microelectronics and Assembly, SPIE Vol. 4230, pp. 156-163, 2000 (Singapore) (EI)

7.Tsai, Hung-Yin, Cheng, Chih-Yung, Liu, Pin-Yin, and Wu, Tung-Chuan, “Innovation machining method on CVD diamond film,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 252-259, 2002 (Australia) (EI)

8.Huang, J. Y., Tsai, H. Y., Wu, C. H., Su, C. C., Fan, C. H., “Fabrication of Microstructure Using Electrochemical Etching in Hydrofluoric Acid,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 302-306, 2002 (Australia) (EI)

9.Hsieh, Chun-Hao, Tsai, Hung-Yin, Lai, Hua-Tan, Lin, Hung-Yi, “Comparison between Mechanical Method and Chemical-assisted Mechanical Method for CVD Diamond Film Polishing,” Proceedings of International Symposium on Nano-Microtechnology: Materials, Processes, Packaging, and Systems, SPIE Vol. 4936, pp. 337-344, 2002 (Australia) (EI)

10.Lin, Chien-Hung, Tsai, Hung-Yin, Chen, Rong-Shun, “Effect of Volumetric Shrinkage in Nanoimprint Lithography,” 2nd International Conference on Nanoimprint and Nanoprint Technology, 2003 (USA)

11.Chen, C. Y., Tsai, H. Y., Su, C. C., Lin, H. H., Cheng, J. T., “Parameters Study of High Density Electron Beam Recording,” Proceedings of International Conference on Mechatronic Technology, 2003 (Taiwan) (EI)

12.Wu, C. H., Liu, P. Y., Cheng, C. Y., Tsai, H. Y., “Preparation of ZnO Thin film on Free Standing Diamond Film by Ion Beam Sputter,” Proceedings of International Conference on Mechatronic Technology, 2003 (Taiwan) (EI)

13.Hsieh, Chun-Hao, Liu, Ping-Yin, Fan, Chin-Hon, Tsai, Hung-Yin, “Diamond Film Growth by 60-KW Microwave Plasma Enhanced CVD Method and Polished by Chemical-Assisted Mechanical Polishing Method,” 14th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2003 (Austria)

14.Chen, C. Y., Tsai, H. Y., Su, C. C., Lin, H. H., Cheng, J. T., “Optimization of Optical Disk Mastering Process Using Electron Beam Recorder,” 2003 The 3rd IEEE Conference on Nanotechnology (IEEE-Nano 2003), pp. 486 – 489, 4 pages, 2003 (USA)

15.Hsieh, C. Y., Ting, C. J., Tsai, H. Y., Chang, Y. Y., Liu, P. Y., Wu, C. H., Cheng, C. Y., Chou, C. P., “The Effects of Surface Treatment on the Morphology of CVD Diamond Films by Electrophoretic Seeding and Ultrasonic Scratch Methods,” 2nd International Symposium on Nano manufacturing, 2004 (Korea)

16.Cheng, C. Y., Tsai, H. Y., Wu, C. H., Liu, P. Y., Hsieh, C. H., Chang, Y. Y., “An oxidation enhanced mechanical polishing technique for CVD diamond films,” 15th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2004 (Italy)

17.Ho, Shih-Shian, Ting, Chia-Jen, Tsai, Hung-Yin, “Innovative fabrication method of 4” thin LiNbO3 layer on Si substrate for high frequency modulators,” Thin Films 2004 & Nano Tech 2004, 2004 (Singapore)

18.Wu, C. C., Horng, R. H., Wu, D. S., Chen, T. N., Ting, C. J., Tsai, H. Y., and Chou, C. P., “Thinning Technology for Lithium Niobate Wafer by Surface Activated Bonding and Chemical Mechanical Polishing,” 2005 International Conference on Solid State Devices and Materials, pp. 88-89, 2005 (Japan)

19.Hsieh, C. Y., Tsai, H. Y., Ting, C. J., Chang, Y. Y., Liu, P. Y., Wang, L. D., Yu, C. W., Chou, C. P., “The effects of nitrogen addition on the diamond films in a 915-MHz microwave plasma enhanced chemical vapor deposition (MPCVD) reactor,” 16th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 2005 (France)

20.Tsai, H. Y., Ting, C. J., Chang, Y. Y., Chou, C. P., “Nitrogen effect on the diamond deposition processing by 915-MHz microwave plasma enhanced chemical vapor deposition reactor,” International Manufacturing Leaders Forum 2006, 23rd-25th Oct., Taipei, Taiwan, 2006 (Taiwan)

21.Tsai, H. Y., “Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” 7th Asia Pacific Conference on Materials Processing, 4th-6th Dec., 2006 (Singapore)

22.Ting, C. J., Tsai, H. Y., Hsu, C. J., Nieh, Y. Y., Chou, C. P., “Finite Difference Time Domain Analysis of 3-D Sub-Wavelength Structured Array for Antireflective Application,” International Display Workshops, 6th-8th Dec., Otsu, Japan, 2006 (Japan)

23.Tsai, H. Y., Ting, C. J., Kuo, K. L., Chou, C. P., “Feasibility Study on UV YAG Laser Patterning on Diamond Film,” Asia Pacific Conference on Optics Manufacturing 2007(Hong Kong)

24.Ting, C. J., Tsai, H. Y., Chou, C. P., “Fabrication of Large-Area Imprint Mold with High-Aspect-Ratio Nano tip Arrays of Sub-Micron Diameter,” Asia Pacific Conference on Optics Manufacturing 2007 (Hong Kong)

25.Tsai, H. Y., Chou, M. C., “Self-Oriented Patterned Arrays of Vertical Carbon Nanotubes for IC Probing Test Application,” 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, Sep., 2007 (Germany)

26.Tsai, H. Y., Kuo, K. L., Ting, C. J., Chou, C. C., Wu, T. C., “Optical Characteristics of Silver Film on the Moth-Eye Structure,” International Conference on Advances in Materials and Processing Technologies, 7th-11th Oct.,2007 (Korea)

27.Wu, C. W., Tsai, J. R. Tsai, H. Y., and Hsiao, C. C., “Fabrication of a metal mold with microstructures using a novel passive-alignment recombining technique,” International Conference on Advances in Materials and Processing Technologies, 7th-11th Oct.,2007 (Korea)

28.Tsai, H. Y., Wu, Chih-We, Kuo, K. L., “Study of Aluminum Film Deposition on the Surface of Micro-Trench by Dual Ion Beam Sputtering,” 20th International Microprocesses and Nanotechnology Conferences, 5th-8th Nov., 2007 (Japan)

29.Ting, C. J, Tsai, H. Y.*, Hsu, C. J., Chou, C. P., “Finite difference time domain analysis of 3-D sub-wavelength structured arrays,” 20th International Microprocesses and Nanotechnology Conferences, 5th-8th Nov., 2007 (Japan) (corresponding author)

30.Tsai, H. Y. and Chang, C. C, “Characterization of Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition,” 2nd International Conference on New Diamond and Nano Carbons, 26th-29th May, 2008 (Taiwan)

31.Tsai, H. Y., and Lu, M. T., “Simulation Study of Anti-Reflective Effects for Different Submicron-structures,” 6th International Conference on Optics Design and Fabrication, 9th-11th June, 2008 (Taiwan)

32.Tsai, H. Y., “Optical Properties of Nanostructure Arrays on Large Area Polymer Sheet by UV Curing and Nano-imprinting Processes,” 4th International Conference on Technological Advances of Thin Films & Surface Coatings, 13th -16th July, 2008 (Singapore)

33.Tsai, H. Y., Luo, S. W., Wu, C. W., and Wang, S. H., “Micro-structure Machining on Silicon by Femtosecond Laser,” 1st International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2008 (Korea)

34.Tsai, H. Y., Ting, C. J., “Low Cost Fabrication of Sub-Wavelength Structures on Large-area Polymer Sheet by UV Curing and Nano-imprinting Processes,” 21st International Microprocesses and Nanotechnology Conferences, 27th-30th Oct., 2008 (Japan)

35.Hung-Yin Tsai, Hsuan-Chun Liu, Jhih-Hong Chen, and Chih-Cheng Yeh, “Study on Field Emission Characteristics of Diamond Nano-tip Array by Porous Alumina Template,” ICCES 2009, 8th-13th Apr., 2009 (Thailand)

36.Tsai, H. Y., and Ting, C. J., “Low Cost Fabrication of Sub-Wavelength Structures on Large-Area Polymer Sheet by UV Curing and Nano-Imprinting Processes,” The 3rd International Symposium on Functional Materials, 15th-18th June, 2009 (Korea)

37.Tsai, H. Y., and Liu, Y. M., “Diamond Film Deposited Directly on Sapphire Substrate by Hot Filament Chemical Vapor Deposition,” 2010 International Conference on Advanced Manufacture, 2nd-5th Feb., 2010 (Taiwan)

38.Y. F. Fan, H. Y. Tsai, M. H. Peng, and Y. W. Huang, “A Fast Method with Searching Window Constraint for Moving Object Detection on a Moving Platform,” The 7th IASTED International Conference on Signal Processing, Pattern Recognition and Applications, 17th-19th Feb., 2010 (Austria)

39.Chih-Wei Wu, Chih-Heng Chi, Hung-Yin Tsai and Yung-Kang Shen, “Fabrication of a Large-Area Silicon Mold with Microstructures Using a Novel Recombining Technique,” The 9th Asia-Pacific Conference on Materials Processing, 7th-10th, June 2010 (Australia)

40.Hung-Yin Tsai, Chih-Cheng Chang and Chih-Wei Wu, “Nitrogen and Bias Effect on Homoepitaxial Diamond Growth by Hot-Filament Chemical Vapor Deposition,” The 9th Asia-Pacific Conference on Materials Processing, 7th-10th, June 2010 (Australia)

41.Hung-Yin Tsai and Chih-Cheng Yeh, “Shielding Effects Study on Field Emission Characteristics of Diamond Nano-tip Array,” 21st European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, 5th-9thSep., 2010 (Hungary)

42.S. W. Luo, T. L. Chang*, H. P. Yang, and H. Y. Tsai, “Wetting Properties on Hydrophobic Surface Structuring of Poly (Ethylene Terephthalate) by Femtosecond Laser Ablation,” 23rd International Microprocesses and Nanotechnology Conferences, 9th-12th Nov., 2010 (Japan)

43.J. J. Kai, J. T. Yang, Z. Y. Wu, M. K. Yeh, and H. Y. Tsai, “Establishing Instructional Equipment of Remote Control Scanning Electron Microscope for incubating K-12 Human Resource of Nanotechnology,” IADIS e-Society 2011, 10th-13th March, 2011 (Spain)

44.Meng-Kao Yeh, Hsiao-Chin Hsieh, Shu-Hsian Chang, Rong-Shun Chen, Hung-Yin Tsai, “Learning Achievement of K-12 Students Participating in a Nanotechnology Hands-on Works Exhibition,” 2011 Canada International Conference on Education, 4th-7th April, 2011 (Canada)

45.Hung-Yin Tsai, Yen-Po Lin, and Cheng-Che Chen, “Tracking and Detecting Moving Objects Using Stereo Camera on Moving Platform,” 21st International Conference on Flexible Automation and Intelligent Manufacturing, 26th-29thJune, 2011 (Taiwan)

46.Hung-Yin Tsai, Ching-Wen Liu, Chih-Cheng Yeh, and Eric Pierre Shih, “Fabrication of AR film using Nano-imprint lithography with a diamond mold,” 21st International Conference on Flexible Automation and Intelligent Manufacturing, 26th-29thJune, 2011 (Taiwan)

47H.Y. Tsai, J.J. Kai, J.T. Yang, Z.Y. Wu, and M.K. Yeh, “Nanotechnology Education with Remote Control Scanning Electron Microscope in Taiwan,” ICEE 2011, 21st-26th Aug., 2011 (UK)

48.H. Y. Tsai, M. T. Lu, and S. W. Luo, “Simulation Study on Anti-Reflective Effects for Different Submicron-structures,” Advanced Design and Manufacturing Engineering 2011, 16th-18th Sep., 2011 (China)

49.Chi-Wei Kuo, and Hung-Yin Tsai, “Thermal stress analysis and failure mechanisms for through silicon via array,” International Microsystems, Packaging, Assembly and Circuits Technology Conference 2011, 19th-21st Oct., 2011 (Taiwan)

50.Tsai, H. Y., Ting, C. J., “Optical Characteristics of Gold Film on the Moth-eye Structure,” 2nd International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2011 (Korea)

51.Tsai, H. Y., Wu, C. W. Wu, Lin, Y. M. and Chang, H. C., “Study on Diamond Thin Film Deposited on Graphite Substrate by Different Pretreatment Methods for MOCVD Application,” 2nd International Symposium on Hybrid Materials and Processing, 27th-29th Oct., 2011 (Korea)

52.Ying- Chen Huang and Hung-Yin Tsai, “Study on Carbon-based Electrode for Air-cathode Microbial Fuel Cell,” 2012 7th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 5th-8th March, 2012 (Japan)

53.Cheng-Che Chen, Hung-Yin Tsai, and Dein Shaw, “Moving object detection on a moving platform using stereo feature points prediction method,” The ASME Verification and Validation Symposium (V&V2012), 2nd-4th May, 2012 (USA)

54.Chi-Wei Kuo and Hung-Yin Tsai, “Thermal stress analysis and failure locations for through silicon via array,” ITherm 2012, 30th May-1st June, 2012 (USA)

55.H. Y. Tsai and S. W. Luo, “Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process,” 62nd CIRP General Assembly 2012, 19th-25th Aug., 2012 (Hong Kong)

56.Hung-Yin Tsai, Kun-Han Yu and Meng-Kao Yeh, “Growth of Nano Crystalline Diamond Films on Quartz by Hot-filament Chemical Vapor Deposition,” CIRP 2013, 23th-25th Jan., 2013 (France)

57.Hung-Yin Tsai, and Yu-Ching Lin “Image Processing Study on Monitoring Individual Drosophila,” ICCES 2013, 24th-28th March, 2013 (USA)

58.Y. C. Lin, Y. R. Lin, R. Chen and H. Y. Tsai, “Automatic Collector of Virgin Drosophila,” CIRP 2013, 18th -24th Aug, 2013 (Denmark)

59.Hung-Yin Tsai and Po-Tang Tseng, “Field Emission Characteristics of Diamond Nano-tip Array Fabricated by Anodic Aluminum Oxide Template with Nano-conical Holes,” International Conference on Diamond and Carbon Materials 2013, 2th-5th Sep, 2013 (Italy)

60.Hung-Yin Tsai, Mei- Yu Chang and Shiang-Yi Chiou. (2014) “Student learning performance on the nanotechnology teaching in the elementary school by instructional media,” 2014 International Symposium on Education, Psychology and Social Sciences 2014, 7th-9th May, 2014 (Japan)

61.Hung-Yin Tsai and Ying-Hsuan Chien, “Experimental and Modeling Analysis on Cell-Wall Fracture of Nannochloropsis Oculata,” International Conference on Nonlinear Problems in Aviation and Aerospace 2014, 15th-18th July, 2014 (Norway)

62.Ping-Huan Tsai and Hung-Yin Tsai, “Fabrication and Field Emission Characteristic of Microcrystalline diamond/Carbon nanotube Double-layered Pyramid Arrays,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings 2014, 15th-18th July, 2014 (China)

63.Po-Tang Tseng, Hung-Yin Tsai, Chih-Chiang Weng, and Jui-Mei Hsu, “Surface Characteristics of Deposited SiOx film Using Hexamethyldisiloxane (HMDSO) Precursor by Atmospheric Pressure Jet,” The 7th International Conference on Technological Advances of Thin Films & Surface Coatings 2014, 15th-18th July, 2014 (China)

64.H.Y. Tsai and J. J. Ma, “Study on field emission characteristics of nano-diamond tips growth on AAO templates with different aspect ratios,” 64th CIRP General Assembly 2014, 24th-30th Aug, 2014 (France)

65.Tung-Che Lee, Shih Chun Tseng and Hung-Yin Tsai, “Diffusion effect of low temperature growth multi-wall carbon nanotubes on metal alloys substrate by thermal-CVD,” 7th Vacuum and Surface Sciences Conference of Asia and Australia 2014, 5th-9th Oct, 2014 (Taiwan)

66.H.Y. Tsai, K. H. Yu, and M. K. Yeh, “Growth of nanocrystalline diamond films on quartz by hot-filament chemical vapor deposition,” 3th International Symposium on Hybrid Materials and Processing 2014,10th-13th Nov, 2014 (Korea)

67.H.Y. Tsai, I.L. Chang and P.H. Tsai, “One-step growth of CNFB-CNT hybrid materials by MPCVD to enhance field emission properties,” 26th edition of the International Conference on Diamond and Carbon Materials 2015, 6th-10th Sep, 2015 (Germany)

68.H.Y. Tsai and P.H. Tsai, “Fabrication and Field Emission Characteristic of Carbon Nano- Flake Ball,” 26th edition of the International Conference on Diamond and Carbon Materials 2015, 6th-10th Sep, 2015 (Germany)

69.Po-Tang Tseng, Ping-Huan Tsai, Anvert Lu, Jiang-Liang Hou, and Hung-Yin Tsai, “Field Emission Characteristic Study on Vertical Few-Layer Graphite/Diamond Composite Film,” The 10th International Conference on New Diamond and Nano Carbons 2016, 22th-26th May, 2016 (China)

70.Yi-Chi Pan, Ching-Hsin Chen, Hung-Yin Tsai, "Rotation-Invariant Feature Matching for Defect Detection on Microscopic Image at Wafer Level," The 5th International Conference on Virtual Machining Process Technology (VMPT 2016), May 22-25, Taipei, Taiwan, 2016

71. Yi-Hung Chen, Hung-Yin Tsai, "Metal Fused Deposition Modeling with IR Based Close-loop Control Sysytem," International Symposium on Green Manufacturing and Application (ISGMA), 27th June - 1st July, 2017(Gyeongju, Korea)

72. Ching-Hsin Chen, Po-Yen Hsiao, Yi-Ting Chen, Ann-Shyn Chiang, Hung-Yin Tsai, “Study on multi-Drosophila social behavior monitoring in high-dynamic-range environment by computer vision,” The International Behavioral Neuroscience Society 27th Annual Meeting 2018, 27th June -2st July, 2018 (USA)

73. H.Y. Tsai and P.H. Tsai, “High field emission current density from carbon nano-flake ball and carbon nanotube hybrid material,” The 29th International Conference on Diamond and Carbon Materials 2018, 2th-6th Sep, 2018 (Dubrovnik, Crotia)

74. Shang-Ru Wu, Hung-Yin Tsai, "Field emission characteristics of pattern-defined CNFB grown by MPCVD" The 29th International Conference on Diamond and Carbon Material (ICDCM 2018), 2th-6th Sep, 2018 (Dubrovnik, Crotia)

75. Yi-Hung Chen, Hung-Yin Tsai, "Field emission characteristics of pattern-defined CNFB/CNT composite structure grown by two-step MPCVD" The 29th International Conference on Diamond and Carbon Material (ICDCM 2018), 2th-6th Sep, 2018 (Dubrovnik, Crotia)

76. Shih-Chun Tseng, Shang-Ru Wu, Hung-Yin Tsai, and Robert Andok., “Field Emission Characteristics of Multi-walled Carbon Nanotubes with Double Gate Electrodes,” The 25th International Conference on Applied Physics of Condensed Matter (APCOM 2019), 19th-21th Jun., 2019 (Slovak Republic)

77. Hung-Yin Tsai., “Fabrication and Field Emission Characteristics of Carbon-Based Nano Composite Materials,” The 25th International Conference on Applied Physics of Condensed Matter (APCOM 2019), 19th-21th Jun., 2019 (Slovak Republic)

78. Pan, W. C., Su, W. L., Tsai, H. Y., “Image processing system with positioning and decoding function and its application in high precision image measurement,” The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology, 12th-15th Nov, 2019 (Japan)

79. Tsai, H. Y., Lin, Y. W., Su, W. L., “Automatic defects classification from AOI images based on image processing and deep learning,” The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology, 12th-15th Nov, 2019 (Japan)

80. Hung Yin Tsai, Ping-Huan Tsai., “Field Emission Characteristics of Carbon Based Structures Fabricated by CVD,” 11th Asia-Pacific International Symposium on the Basics and Applications of PlasmaTechnology (APSPT-11), 11th-14th Dec, 2019 (Japan)

81. Hung-Yin Tsai, Yi-Hung Chen,Tsai-Yi Cheng., “Wire and arc additive manufacturing with reinforcement learning,”CIRP Winter Meetings Planning , 19th-21th Feb, 2020( Paris)

82. Hung-Yin Tsai, “Field Emission Characteristics of Carbon-Based Structures Fabricated by CVD,” International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM 2020), 15th-18th Nov., 2020 (Korea)

83.Hung-Yin Tsai, Tsai-Yi Cheng, Po-Wei Pan, “Study on Wire and Arc Additive Manufacturing of Metals Using Image Processing and Reinforcement Learning”, The 9th International Conference of ASPEN, 15th-18th Nov, 2022 (Singapore)

84.Hung-Yin Tsai, Qi-Fan Liu, Cheng-I Chang, Ruei-Chi Hsu, “Study on the Spinnable Carbon Nanotube Arrays Prepared by Chemical Vapor Deposition”, The 9th International Conference of ASPEN, 15th-18th Nov, 2022 (Singapore)

85.Yu-Xuan Cho, Shang-Ru Wu, Yi-Hung Chen, Gabriel Vanko, Robert Andok, Hung-Yin Tsai, “Study of Flexible Tactile Sensor Fabricated by Laser Induced Metallization,” 7th International Conference on Advances in Functional Materials (AFM2023) , 9th-12th Jan, 2023 (Japan)

D. 國內中文刊物論文及研討會論文集

1.Hocheng, H., Tsai, H. Y., Lai, K. C., Lin, H. Y., and Wu, T. C., “A Kinematic Analysis of Chemical Mechanical Planarization Based on Velocity Model of the Planetary Train,” 第三屆奈米工程暨微系統技術研討會論文集, pp. 4-05-4-08, 1999 (Taiwan)

2.黃珩春、楊詔中、蔡宏營、陳世洲、沈聖智，「奈米加工技術於光通訊被動元件之製造設計」，機械工業雜誌，89年8月號(221)， pp. 148-160

3.Chang, F. Y., Ting, C. J., Tsai, H. Y., Lin, H. Y., Wu, T. C., “Fine Grinding and Polishing Process for Next Generation Photomask Substrate,” 第四屆奈米工程暨微系統技術研討會論文集, pp. 2-53-2-59, 2000 (Taiwan)

4.蔡宏營、潘正堂、周敏傑、陳世洲、吳東權，“Feasibility Study of Laser ablating ITO coated on Plastic Substrate,”第四屆奈米工程暨微系統技術研討會論文集， pp. 2-115-2-121， 2000 (Taiwan)

5.Pan, C. T., Tsai, H. Y., Lin, Y. S., Yang, J. J., Liu, M. Y., Chen, S. C., Chou, M. C., Yang, H. H., “Micro-optical Components Fabricated by Excimer Laser Ablation,” 第四屆奈米工程暨微系統技術研討會論文集, pp. 2-129-2-137, 2000 (Taiwan)

6.周敏傑、王宏杰、蔡宏營， “Development Study of X-Ray Photoresist (PMMA),” 第四屆奈米工程暨微系統技術研討會論文集， pp. 3-21-3-27, 2000 (Taiwan) (in Chinese)

7.Tsai, H. Y., Fan, C. H., Lin, H. Y., Wu, T. C., “Kinematic Analysis and Simulation of Ultra-precision Grinding Based on Velocity Model,” Proceeding of 5th Nano Engineering and Micro System Technology Workshop, pp.4-29-4-33, 2001 (Taiwan)

8.Chao, C. L., Ma, K. J., Hung, J. Y., Liu, Y. H., Chen, Y. T., Lin, H. Y., Chang, Y. M., Tsai, H. Y., “Investigation of the Machinability of CVD Diamond Film,” Proceeding of 5th Nano Engineering and Micro System Technology Workshop, pp. 2-15-2-19, 2001 (Taiwan)

9.蔡宏營、 林宏彝、 吳東權，「超精密輪磨加工之運動學分析與模擬」， 第三屆磨粒加工技術論文發表會論文集， pp. 93-96, 2001 (Taiwan)

10.蔡宏營、 劉丙寅、程智勇、 吳志宏、 吳東權，「觸媒輔助鑽石膜平坦化技術」，第六屆奈米工程暨微系統技術研討會論文集， 2002 (Taiwan)

11.謝浚豪、 賴華堂、蔡宏營、 林宏彝，「機械拋光與化學輔助機械拋光對加工CVD鑽石膜之比較」， 第六屆奈米工程暨微系統技術研討會論文集， 2002 (Taiwan)

12.吳志宏、程智勇、蔡宏營，「表面聲波濾波器發展現況及未來機會」，機械工業雜誌，91年8月號(233) ， pp. 82-87

13.鄭瑞庭、蔡宏營、林熙翔、蘇建彰、陳建洋，「簡介下世代微影技術與奈米轉印微影技術」, 機械工業雜誌，92年8月號(245)，pp. 106-116

14.蔡宏營、鄭瑞庭、陳建洋，「淺談光子晶體發光二極體」， 機械工業雜誌， 92年8月號(245) ， pp. 117-128

15.蔡宏營，「奈米轉印技術介紹」，中華民國力學學會會訊，104期，92年9月，10 pages (invited)

16.Wu, C. H., Cheng, C. Y., Tsai, H. Y., “Study on the Characteristics of ZnO Thin Film Deposited by Ion Beam Sputter,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)

17.Su, C. C., Lin, H. H., Tsai, H. Y., Chen, C. Y., Cheng, J. T., “Fabrication of Two-Dimensional Periodic Nanostructure in Gallium Arsenide Substrate,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)

18.Liu, P. Y., Hsieh, C. H., Fan, C. H., Tsai, H. Y., Hong, F. C., Huang, S. M., “Innovation Study on Low Surface Roughness of Diamond Thin Film,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)

19.Chao, C. L., Shiu, J. W., Ma, K. J., Chen, T. T., Tsai, H. Y., Lin, H. Y., “Laser Smoothing and Thermo-Chemical Polishing of CVD Diamond Film,” Proceeding of 7th Nano Engineering and Micro System Technology Workshop, 4 pages, 2003 (Taiwan)

20.Huang, C. W., Chen, Y. H., Tsai, H. Y., “The Study on Femtosecond Laser Induced Periodic Surface Structures(FLIPSS) on STAVAX and Ni-coated STAVAX,”Optical Engineering Taiwan Photonics Society,Vol.140,pp 45-54, 2017 (Taiwan)

21.Yi-Wei Lin and Hung-Yin Tsai., “Automatic defects classification from AOI images based on image processing and deep learning,” The 14th International Microsystems, Packaging, Assembly and Circuits Technology Conference, 23th-25th Oct., Taiwan, 2019 (Taiwan)

22.蔡宏營、林家弘，「奈米轉印製程與設備技術」，機械月刊，93年5月號（第346期），pp. 28-39

23.謝丞聿、張延瑜、蔡宏營、王良德、藍春發，「CVD鑽石添加氮氣效應研究現況」，機械工業雜誌，94年8月號(269)，pp. 21-29

24.劉丙寅、游家瑋、蔡宏營、葉性銓、丁嘉仁，「異質晶圓接合機制探討及發展現況」，機械工業雜誌，94年8月號(269)，pp. 5-20

25.吳嘉城、 陳采寧、 洪瑞華、 何世賢、 丁嘉仁、蔡宏營、 武東星，「鈮酸鋰複合晶圓延性製程技術開發」，中國材料科學學會2005年年會， pp. 326, 2005 (Taiwan)

26.蔡宏營、 丁嘉仁、 許沁如、 周長彬，「三維次波長奈米結構陣列應用於抗反射薄膜之時域有限差分法研究」， 第十屆奈米工程暨微系統技術研討會，2006 (Taiwan)

27.蔡宏營、張志成、周敏傑、林經協、江億龍，「奈米碳管應用在場發射顯示應用之美國專利介紹與分析」，工業材料，96年1月號(241)，pp. 153-169

28.蔡宏營、 張志成、江海邦，「熱燈絲化學氣相沈積成長同質磊晶鑽石薄膜之研究」，中國機械工程學會第二十四屆全國學術研討會， 23rd-24th Nov. ， 2007 (Taiwan)

29.蔡宏營、 陳智鴻，「利用多孔性陽極氧化鋁模板製備奈米鑽石針尖陣列之研究」，中國機械工程學會第二十四屆全國學術研討會， 23rd-24th Nov. ， 2007 (Taiwan)

30.張天立、羅紹維、姚中翰、周大鑫、蘇志杰、蔡宏營、林宏彝，「雷射超精密微奈米結構加工技術介紹」，機械工業雜誌，97年9月號(306)，pp. 2-12

31.蔡宏營、 李志源、吳振昌，「具奈米碳管之碳布電極應用於微生物燃料電池之產電效能研究」， 中國機械工程學會第二十四屆全國學術研討會， 21st-22nd  Nov.， 2008 (Taiwan)

32.劉烜君、 陳智鴻、 葉致成、 蔡宏營，「以多孔性氧化鋁模板製備奈米鑽石針尖場發射特性之研究」， 中華民國力學學會第三十二屆全國力學會議， 28th-29th Nov. ， 2008 (Taiwan)

33.羅紹維、 王星豪、 蔡宏營，「飛秒雷射微結構加工與其截面形狀模擬研究」， 中華民國力學學會第三十二屆全國力學會議， 28th-29th Nov. ， 2008 (Taiwan)

34.蔡宏營、 簡胤軒、 郭騏緯、 李桂宣、 周大鑫、 蘇志杰， 「應用於生質能之綠球藻細胞破壁機械與壓力梯度應力分析」， 中國機械工程學會第二十六屆全國學術研討會，20th-21st Nov.，2009 (Taiwan)

35.蔡宏營、林諺伯，「利用雙相機於移動平台上偵測並追蹤移動物體技術」， 中國機械工程學會第二十七屆全國學術研討會， 10th-11th Dec. ， 2010 (Taiwan)

36.林彥銘、張皓鈞、蔡宏營，「前處理法對於鑽石薄膜沈積於石墨應用於有機金屬化學氣相沈積之研究」，中國機械工程學會第二十七屆全國學術研討會，10th-11th Dec. ， 2010 (Taiwan)

37.沈彥廷、王雨弘、蔡宏營，「高爾夫球運動參數擷取與軌跡分析」，中國機械工程學會第二十八屆全國學術研討會， 10th-11th Dec. ， 2011(Taiwan)

38.曾柏棠、蔡宏營，「錐形陽極氧化鋁孔洞陣列之製程研究」， 中華民國力學學會第三十六屆全國力學會議，16th-17th Nov. ，2012 (Taiwan)

39.徐逢懋、 蔡宏營，「果蠅睡眠監控平台影像處理」，中華民國力學學會第三十六屆全國力學會議,16th-17th Nov. ， 2012 (Taiwan)

40.陳冠宇、 許智帆、今井壽、近藤勝義、蔡宏營，「高強度極高傳導性質的銅鈦/奈米碳纖複合材料研究」， 中國機械工程學會第三十一屆全國學術研討會， 6th-7th Dec.， 2014 (Taiwan)

41.許智帆、 蔡宏營，「製造參數對碳纖/環氧樹脂複合材料機械性質的影響」，2014台灣風能學術研討會暨NEPII離岸風力及海洋能源主軸成果發表會，16th Dec.，2014 (Taiwan)

42.許智帆、蔡宏營，「製造參數與環境因子對碳纖/環氧樹脂複合材料機械性質的影響」，2016 CTAM Conference on Theoretical and Applied Mechanics 25th Nov.，2016 (Taiwan)

43.黃駿惟、陳翼弘、蔡宏營,“The Study on Femtosecond Laser Induced Periodic Surface Structure(FLIPSS) on STAVAX surface,” 2016 Taiwan Precision Technology Workshop 11th Nov.， 2016 (Taiwan)

44.賴學良、李東哲、蔡宏營,“Field emission characteristics of plasma treated carbon nanotubes on diamond tip arrays,” 2017 全國製造工程研討會 17th-18th Nov.，2017 (Taiwan)

45.莊勝超、李東哲、蔡宏營,“Study on field emission characteristics of hybrid nano-carbon materials fabricated by MPCVD in one step,” 2017 全國製造工程研討會 17th-18th Nov.，2017 (Taiwan) 

46.林和億、蔡宏營，「智慧機械的目前發展與展望」，機械新刊，2019年2月號(第27期)，pp. 86-95

47.陳藝友、蔡宏營，「微波電漿輔助化學氣相沈積法成長碳材料應用於場發射手持式常壓電漿產生裝置之設計研究」，中國機械工程學會第36屆全國學術研討會，7th-8th Dec.，2019 (Taiwan)

48.林子耘、蔡宏營，「基於奈米碳材料場發射特性所設計之手持式常壓電漿產生系統」， 中國機械工程學會第36屆全國學術研討會，7th-8th Dec. ，2019 (Taiwan)

49.林奕緯、蔡宏營，「基於影像處理及深度學習實現自動光學檢測影像的缺陷分類」， 第十一屆粵澳港大灣區博士生南山學術論壇暨第九屆兩岸清華研究生學術論壇，10th- 12th Jun.，2019 (China)

50.游菘淵、蔡宏營，「基於神經網絡之表面瑕疵辨識系統」，中國機械工程學會第三十七屆全國學術研討會，20th-21th Nov.，2020(Taiwan)

51.許恩齊、蔡宏營，「以生成對抗網路產生印刷電路板之掃描式電子顯微鏡影像」，中國機械工程學會第三十七屆全國學術研討會，20th-21th Nov.，2020(Taiwan)

52.鍾翔亦、蔡宏營，「基於片狀羰基鐵粉與還原氧化石墨烯製備功能性電磁波屏蔽材料」，中國機械工程學會第三十七屆全國學術研討會，20th-21th Nov.，2020(Taiwan)

53.黃伯宇、蔡宏營，「以基因演算法優化晝光導光幾何結構之研究」，中國機械工程學會第三十七屆全國學術研討會，20th-21th Nov.，2020(Taiwan)

54.朱宇軒、蔡宏營，「以雷射誘發金屬化技術製備的可撓性觸覺傳感器」，中華民國力學學會第四十四屆全國力學會議，26th-27th Nov.，2020(Taiwan)

54.林高任、蔡宏營，「以浮動催化劑化學氣相沉積法製備奈米碳管及探討碳管薄膜形貌」，中華民國力學學會第四十五屆全國力學會議，18th-19th Nov., 2021(Taiwan)

55.鄭博鴻、蔡宏營，「基於氧化石墨烯結合片狀富鋅環氧複合材料之抗腐蝕塗層」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

56.魏麒庭、蔡宏營，「基於雙向語言模型之法律諮詢系統」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

57.蔡坤明、蔡宏營，「基於強化學習的金屬電弧積層製造之疊層優化」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

58.范植皓、蔡宏營，「機械手臂的虛實整合與強化學習的應用」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

59.陳家麒、蔡宏營，「基於深度學習之異常檢測」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

60.劉宇凌、蔡宏營，「基於深度學習與三維立體資訊之機械手臂夾取」，中國機械工程學會第三十八屆全國學術研討會，3rd-4th Dec., 2021(Taiwan)

61.蕭靖澂、蔡宏營，「基於強化學習於合金材料之雷射製程優化」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

62.吳余山、蔡宏營，「基於肌肉協調理論之超聲波控制仿生義肢手」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

63.潘柏瑋、蔡宏營，「基於影像之深度強化學習與機械手臂之虛實整合 」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

64.張崢一、蔡宏營，「基於包覆性複合材料之高效能磁流變彈性膠體製作與特性研究」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

65.趙宇涵、蔡宏營，「基於影像分割結合異常檢測於公開工業資料集之應用」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

66.王冠晴、蔡宏營，「使用陽極氧化法製備多孔薄膜提高摩擦奈米發電機性能」，中國機械工程學會第三十九屆全國學術研討會，2nd-3rd Dec, 2022(Taiwan)

67.廖祥宇、蔡宏營，「基於紫外光奈米壓印技術探討液滴分布圖案之填充性研究」，中華民國力學學會年會暨第四十六屆全國力學會議，18th-19th Nov, 2022(Taiwan)

68.林椲哲、蔡宏營，「René 80之鋁鎳合金薄膜形成及高溫環境下氧化反應」，中華民國力學學會第四十七屆全國力學會議，17th-18th Nov, 2023(Taiwan)

69.Ching-Cheng Hsiao, Pang-Yen Huang and Hung-Yin Tsai，「基於強化學習於陶瓷互連元件之雷射加工參數研究」，中華民國力學學會第四十七屆全國力學會議，17th-18th Nov, 2023(Taiwan)

70.郭峻宇、蔡宏營，「磁場條件與膠體類型對磁流轉彈性膠體複合材料測試探針之機械特性與電性的影響」，中國機械工程學會第四十屆全國學術研討會(CSME 2023)，1st-2nd Dec, 2023(Taiwan)

71.楊智均、蔡宏營，「基於生成式模型之印刷瑕疵檢測」，中國機械工程學會第四十屆全國學術研討會(CSME 2023)，1st-2nd Dec, 2023(Taiwan)

72.吳承愷、蔡宏營，「基於深度學習之快速三維表面形貌拼接」，中國機械工程學會第四十屆全國學術研討會(CSME 2023)，1st-2nd Dec, 2023(Taiwan)

73.蘇暐聯、王聿峰、蔡宏營，「基於影像處理與機器學習對影像之字元印刷瑕疵檢測研究」，中國機械工程學會第四十屆全國學術研討會(CSME 2023)，1st-2nd Dec, 2023(Taiwan)

 

E. Book/Book Chapter

1.蔡宏營、吳東權，「奈米轉印製程與設備技術」，<台灣奈米科技-從2004到嚮往的大未來>（工研院出版），2004年(Book Chapter)

2.H. Hocheng, H.Y. Tsai, U.U. Jadhav, K.Y. Wang and T.C. Lin, “Laser Surface Patterning, in Comprehensive Material Processing Technology,” Elsevier (Book Chapter), 2012

3.Hocheng, H. and Tsai, H.Y., "Advanced Analysis of Nontraditional Machining", a book of Springer, New York, ISBN 978-1-4614-4053-6, 500 pages, 2013 (Book)

4.A.Y.-C. Nee, M. Zarinejad, Y. Suzhu, S.Z. Shanyong, G. Qi, D.W. S K, H. Zheng, S. Bhowmik, H. Hocheng, H.-Y. Tsai, J. Wei, F. Fang, Z. Xu, W. Zhou, B. Song, and S. Subbiah, 2014, "Handbook of Manufacturing Engineering and Technology," a book of Springer, New York, ISBN 978-1-4471-4976-7, 6 volumes, 2014 (Book)

5.蔡宏營，奈米科技概論與應用，五南出版社，Feb. 2013